Have any questions you are not seeing above? No problem, shoot us an email and we are happy to get you taken care of!

Return to pnwcomponents.com

PNW Components FAQ's

<p>Puget 2x lever not returning to its original position when released?</p>
<p>Your silver/steel cable may need to be snugged up a bit. Please make sure that fin is in the correct/up position, prior to tightening the hex bolt. Also, make sure that the silver bolt on the side of the lever is not too tight.</p>
<p>Check out our video for some helpful tips!&#xA0;<iframe src="//www.youtube-nocookie.com/embed/VncM21SrHC8" width="560" height="315" frameborder="0" allowfullscreen></iframe>&#xA0;<br><br><br></p>

Puget 2x lever not returning to its original position when released?
Your silver/steel cable may need to be snugged up a bit. Please make sure that fin is in the correct/up position, prior to tightening the hex bolt. Also, make sure that the silver b

My Puget 2x lever will not return/actuate properly. 

Installation and Troubleshooting

Which bike lights are compatible with my Range or Coast Stem mount?

Which lever do I need?

Which adapter do I need to order with my Loam lever?

Which saddle rails are compatible with my PNW dropper post?

Can I run a seatpost shim with my PNW dropper post?

Can I convert my drop bar shifter to actuate my PNW dropper post?

How do I select the best post for my bike frame and height?

Components Compatibility

What is the PNW Components return policy?

Standard shipping time to the U.S.?

Standard shipping time to the UK?

I don't see a shipping option for my location.

Order Management

My Puget 2x lever will not return/actuate properly.

I have a creaky post.

My post is sagging.

My seatpost is spinning.

When should I service my PNW dropper post?

I need to replace my air cartridge on my internally routed post. What do I do?

What's with this extra barrel nut in my sticker bag?

The return rate is slow on my externally routed post.

There is a bit of play in my dropper.

How much PSI should I run in my Loam post?

How much PSI should I run in my Coast post?

Which way is my steel cable supposed to run?

Slow Loam post?

What kind of warranty comes with my PNW Components purchase?

Is the mount on the Range Stem removable?

Do PNW Dropper Posts have infinite adjustment?

I changed my brakes. Do I have to order a whole new Loam Lever?

Can I clamp my PNW Components dropper post in a stand?

The Loam vs. the Rainier Gen 3 vs. the Ridge post

My Rover Hip Pack keeps coming loose as I ride. How do I keep it tight and secure around my waist?

Product Information

International Shipping Info

International Shipping

My Puget 2x lever will not return/actuate properly.Updated 2 years ago